• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Table 2-1.   Preventive Maintenance Checks and Services (All Models) (Cont) - TM-9-2320-365-10_127
Table 2-1.   Preventive Maintenance Checks and Services (All Models) (Cont) - TM-9-2320-365-10_130

/.5tonv1-2/TM-9-2320-365-10 Palletized Load System Model M1074/M1075 NSN 2320-01-304-2277 2320-01-304-2278 Manual
Page Navigation
  89    90    91    92    93  94  95    96    97    98    99  
TM 9-2320-365-10 Table 2-1.   Preventive Maintenance Checks and Services (All Models) (Cont) Location Item No. Interval Item to Check/ Service Crewmember Procedure Not Fully Mission Capable If: NOTE •  Oil pressure will increase when engine speed increases and will decrease when engine speed decreases. •  Engine oil pressure will be lower when engine is at maximum operating temperature (WATER TEMP gage reads 230F (110C). 12 Before OIL PRESS Gage (Cont) b.   Check that engine OIL PRESS gage indicates between 15-80 psi (103-552 kPa). b.  Gage indicates less than 15 psi (103 kPa). NOTE Perform check (13) only if vehicle is equipped with tachometer. 13 Before Tachometer Check that tachometer indicates between 750-850 rpm while engine is at idle. If tachometer indicates engine rpm outside of 750- 850 rpm range, notify Unit Maintenance. Change 1 2-43







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.