Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont)

Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont) - TM-9-2320-365-10_140

Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont) - TM-9-2320-365-10_142

/.5tonv1-2/TM-9-2320-365-10 Palletized Load System Model M1074/M1075 NSN 2320-01-304-2277 2320-01-304-2278 Manual
Page Navigation
106

TM 9-2320-365-10 Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont) Location Item No. Interval Item to Check/ Service Crewmember Procedure Not Fully Mission Capable If: WARNING Engine dipstick is located close to starter solenoid connectors which contain 24 vdc and high amperage. Use caution removing/installing engine dipstick to prevent shorting across starter solenoids when checking engine oil level. Failure to comply may result in serious injury or death to personnel or damage to equipment. CAUTION Do not overfill engine with oil. Failure to comply may result in damage to equipment. 34 After Engine Oil a. Check engine oil dip- stick for oil level. Level should be between ADD line and FULL line. b. Add oil as required (Appendix F). c. Lower cab (para 2- 22b). If engine oil is over FULL LINE, discolored, or milky, Notify Unit Maintenance. Change 1 2-55

Privacy Statement
Press Release
Contact