• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Warm Engine Start-cont. - TM-9-2320-365-10_234
Warm Engine Start-cont. - TM-9-2320-365-10_236

/.5tonv1-2/TM-9-2320-365-10 Palletized Load System Model M1074/M1075 NSN 2320-01-304-2277 2320-01-304-2278 Manual
Page Navigation
  192    193    194    195    196  197  198    199    200    201    202  
TM 9-2320-365-10 CAUTION •  If  STOP  indicator  illuminates  (red)  to  warn  Operator  when  a  potential engine failure (e.g., low oil pressure, low coolant, coolant over-heating, etc.)  has  occurred,  shut  down  engine  immediately  (para  2-21f)  and perform Engine System Troubleshooting (para 3-3).   Failure to comply may result in damage to equipment. •  If OIL PRESS gage does not show engine oil pressure of 15-80 psi (103- 552 kPa) within 10-15 seconds after starting engine, shut down engine immediately  (para  2-21f)  and  perform  Engine  System  Troubleshooting (para 3-3).   Failure to comply may result in damage to equipment. (8)   Check that WATER TEMP gage (8) reads between 100 F to 230 F (38 C to 110 C). If WATER TEMP gage reads in red zone and high engine temperature indicator (4)  is  illuminated,  shut  down  engine  (para  2-21f)  and  perform  Engine  System Troubleshooting (para 3-3). NOTE Oil pressure will increase when engine speed increases and will decrease when engine speed decreases. (9)   Check  that  OIL  PRESS  gage  (9)  reads  between  15-80  psi  (103-552  kPa).    If  OIL PRESS gage reads in red zone and engine oil pressure indicator (10) is illuminated, shut down engine (para 2-21f) and perform Engine Troubleshooting (para 3-3). Change 1 2-143







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.