(7) Turn SUSPENSION knob (1) to the RAISE position.
Use back-up hydraulic pump (para 2-41) if pressing PUMP knob does not
accomplish step (8).
(8) Press and hold PUMP knob (3) until vehicle returns to normal height and suspension
compression plate (6) is loose.
(9) Remove pin (7) from axle stud (8).
Both suspension compression plates must be installed on axle studs.
Failure to comply may result in serious injury or death to personnel.
Left and right side suspension compression plates are removed the same
way. Right side suspension compression plate shown.
(10) Remove suspension compression plate (6) from axle stud (8).