F-9. LUBRICATION NOTES (CONT)
Hydraulic fluid (MIL-H-5606A) is TOXIC. Wear protective goggles
and gloves; use only in well ventilated area; avoid contact with skin,
eyes, and clothes. Skin and clothing that come in contact with
hydraulic fluid should be washed immediately. Saturated clothing
should be removed immediately. Failure to comply may result in
serious injury or death to personnel.
6. Check air/hydraulic power unit hydraulic fluid level monthly. Hydraulic fluid level
should be between LOW level mark and FULL level mark on dipstick. Fluid level
checks can be performed with the cab raise or lowered.
Fluid level checks should be performed with the cab lowered, if possible. Remove
dipstick from air/hydraulic power unit, wipe dipstick clean and insert in air/hydraulic
power unit (Do Not thread dipstick in air/hydraulic power unit) remove dipstick and
read hydraulic fluid level. Install dipstick in air/hydraulic power unit.
7. Check power steering oil level weekly. Fill reservoir with OE/HDO specified for the
ambient temperature. Reservoir is full when oil is between the two marks on the
dipstick. Do not overfill. Remove dipstick, wipe clean and install dipstick fully into
reservoir. Remove dipstick and read oil level.
8. Lubricate front and rear gladhand coupler seals weekly with VV-D-1078 Damping