• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PRESSURE TEST - TM-9-2320-365-34-1_1049
Remove control valve module

/.5tonv1-2/TM-9-2320-365-34-1 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
  1005    1006    1007    1008    1009  1010  1011    1012    1013    1014    1015  
1.     TEST OPTIONS     Visual Inspection REASON FOR QUESTION YES NO Replace C solenoid (para 7-7) and continue with step 2. WARNING       CAUTION       Tools and Special Tools   Tool Kit, Genl Mech (Item 68, Appendix B)    Goggles, Industrial (Item 25, Appendix B) Read WARNING and CAUTION on following page. TM 9-2320-365-34-1 2-958          Change 1 START INITIAL SETUP    Equipment Conditions      Engine shut down (TM 9-2320-365-10).    Personnel Required      (2)       KNOWN INFO        POSSIBLE PROBLEMS Transmission oil level OK. Main oil pressure low. C3 oil pressure low. Are control valve solenoid preformed packings damaged, or are valves stuck or sticking? If control valve module solenoid  preformed packings are free from damage, and valves are not stuck or sticking, C solenoid is faulty. Faulty C solenoid. Faulty control valve module. Faulty WTEC III TPSS. Repair control valve module (para 7-11). c80.  WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE           55 AND ANY SUB CODE







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.