D-20. TRANSMISSION LIFT AND MOUNTING BRACKET ASSEMBLY (CONT)
Plate, Steel, ASTM A-36
13.745 in. (349.1 mm) x 1.55 in. (39.4 mm) x
0.38 in. (9.6 mm) thick
Figure D-40. Transmission Lift and Mounting Bracket Top and Bottom Braces
a. All dimensions are in inches (millimeters).
b. Fabricate top and bottom braces (4) from ASTM A-36 steel plate.
c. Chamfer two edges of top and bottom braces (4) as shown in Figure D-40. Transmission Lift and Mounting
Bracket Top and Bottom Braces.
d. De-burr and remove sharp edges.