Change 1 2-229TM 9-2320-365-34-1CONTINUITY TEST(1) Set multimeter to ohms.(2) Connect positive (+) probe of multimeterto internal wiring harness 24-pin connectorpin B2.(3) Connect negative (-) probe of multimeterto internal wiring harness connector Bpin B and note reading on multimeter.(4) If continuity is not present, replace transmission internal wiring harness(para 7-13).(5) Connect positive (+) probe of multimeter to internal wiring harness 24-pin connectorpin B2.(6) Connect negative (-) probe of multimeterto all other pins in internal wiring harness24-pin connector, except pins B1 and E1,and note reading on multimeter.(7) Connect negative (-) probe of multimeter to ground and note reading on multimeter.(8) If continuity is present, transmission internal wiring harness is shorted; replace transmission internal wiring harness (para 7-13).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business