1. WARNING       CAUTION       Read WARNING and CAUTION on following page.             KNOWN INFO                         TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     TM 9-2320-365-34-1 2-600          Change 1 START Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty transmission turbine speed sensor. Faulty WTEC III transmission ECU.        POSSIBLE PROBLEMS        Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119p to connector P67-V? YES Replace transmission external wiring harness (para 6-7). NO If continuity is not present, transmission external wiring harness is faulty. Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) References   TM 9-4910-571-12&P Personnel Required   (2) INITIAL SETUP   Equipment Conditions     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial  (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) c49. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE         22 SUB CODE 15 (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION         ADAPTER CABLE ASSEMBLY)