WARNING       CAUTION       Read WARNING and CAUTION on following page.             KNOWN INFO                     POSSIBLE PROBLEMS                   TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     Replace transmission external wiring harness (para 6-7). YES 1. TM 9-2320-365-34-1 2-672          Change 1 NO START INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required    (2) References    TM 9-4910-571-12&P Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty A solenoid. Faulty WTEC III transmission ECU. Is continuity present from connector P119-M to connector P67-G? If continuity is not present, transmission external wiring harness is faulty. c56. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE         42, 44, 45, 46, AND/OR 69 SUB CODE 12 (PRIOR TO SERIAL NUMBER 6510032369         WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)