Change 1 2-683TM 9-2320-365-34-1CONTINUITY TEST(1) Set multimeter to ohms.(2) Connect positive (+) probe of multimeterto internal wiring harness 24-pin connectorpin A2. (3) Connect negative (-) probe of multimeterto internal wiring harness connector Apin B and note reading on multimeter.(4) If continuity is not present, replacetransmission internal wiring harness(para 7-13).(5) Connect positive (+) probe of multimeterto internal wiring harness 24-pin connectorpin A2.(6) Connect negative (-) probe of multimeterto all other pins in internal wiring harness24-pin connector, except pins D1 and H1,and note reading on multimeter.(7) Connect negative (-) probe of multimeterto ground and note reading on multimeter.(8) If continuity is present, transmissioninternal wiring harness is shorted; replacetransmission internal wiring harness(para 7-13).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business