1. WARNING       CAUTION       Read WARNING and CAUTION on following page. START             KNOWN INFO                         TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     c68. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE        42, 44, AND/OR 45 SUB CODE 22 (PRIOR TO SERIAL NUMBER 6510032369 WITH        TRANSMISSION ADAPTER CABLE ASSEMBLY) TM 9-2320-365-34-1 2-816          Change 1 INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required   (2) References   TM 9-4910-571-12&P Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty G solenoid. Faulty WTEC III transmission ECU.        POSSIBLE PROBLEMS        Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119-D to connector P67-C? If continuity is not present, transmission external wiring harness is faulty. Replace transmission external wiring harness (para 6-7). YES NO