CONTINUITY TEST - TM-9-2320-365-34-1

WTEC III TRANSMISSIO PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 41, 42, 44, 45, 46 AND/OR 69 SUB CODE 23 (CONT) - TM-9-2320-365-34-1_926

WTEC III TRANSMISSIO PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 41, 42, 44, 45, 46 AND/OR 69 SUB CODE 23 (CONT) - TM-9-2320-365-34-1_928

/.5tonv1-2/TM-9-2320-365-34-1 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
887

TM 9-2320-365-34-1 Change 1 2-836.1 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to transfer case connector pin B. (3) Connect negative (-) probe of multimeter to transfer case wiring harness connector socket B and note reading on multimeter. (4) If continuity is not present, replace transfer case wiring harness (para 8-2). (5) Connect positive (+) probe of multimeter to transfer case connector pin B. (6) Connect negative (-) probe of multimeter to all other pins in transfer case connector and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is present, transfer case wiring harness is shorted; replace transfer case wiring harness (para 8-2).

Privacy Statement
Press Release
Contact