TM 9-2320-365-34-2
21-4. ROTATING CLUTCH MODULE REPAIR (CONT)
(18) Install bushing sleeve (20), three sealrings (21), and
preformed packing (22) on shaft (23).
(19) Install shaft (23) in clutch assembly (13).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(20) Install retaining ring (24) on shaft (23).
NOTE
Alternately stack clutch disk and intermediate
plates.
(21) Install six clutch disk (25) and intermediate plates (26) in
clutch assembly (13).
(22) Install clutch disk (27) in clutch assembly (13).
(23) Install retaining ring (28) in clutch assembly (13).
(24) Install C1 drive hub (29) in clutch assembly (13).
(25) Install thrust bearing (30) in C2 drive hub (31).
(26) Install C2 drive hub (31) in clutch assembly (13).
(27) Install bushing (32) in spur gear (33).
(28) Install spur gear (33) in clutch assembly (13).
(29) Install bushing (34) in spur gear (33).
21-28
