TM 9-2320-365-34-23-5. ENGINE BRACKET REPLACEMENTThis task covers:a. Removalb. Installationc. Follow-On MaintenanceINITIAL SETUPEquipment ConditionsAir compressor removed (para 11-2) (leftmount support).100 amp alternator removed, if equipped (TM9-2320-365-20-3) (right mount support).200 amp alternator removed, if equipped (TM9-2320-365-20-5) (right mount support).Tools and Special ToolsTool Kit, Genl Mech (Item 68, Appendix B)Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)Goggles, Industrial (Item 25, Appendix B)Materials/PartsNut, Self-locking (Item 133, Appendix F)Personnel Required(2)WARNINGWear appropriate eye protection whenworking under vehicle due to thepossibility of falling debris. Failure tocomply may result in injury to personnel.a. Removal.NOTEPerform step (1) on right engine bracket.(1) Remove two screws (1) and washers (2) from alternatorsupport bracket (3).WARNINGEngine weighs approximately 1500 lbs (681kgs). Attach a suitable lifting device prior toremoval. Failure to comply may result inserious injury or death to personnel ordamage to equipment.CAUTIONDo not lift engine at this time. Failure tocomply may result in damage to equipment.(2) Take up slack with lifting device.3-63
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business