• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PULLEY DAMPER REPLACEMENT
CRANKSHAFT FRONT SEAL REPLACEMENT

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  76    77    78    79    80  81  82    83    84    85    86  
TM 9-2320-365-34-2 3-7.   PULLEY DAMPER REPLACEMENT (CONT) b.   Installation. CAUTION Damper   is   easily   damaged   and   must   be handled  carefully.     Failure  to  comply  may result in damage to equipment. NOTE Step (1) requires the aid of an assistant. (1)  Position   pulley   (1),   damper   (2),   and   adapter   (3)   on crankshaft pulley (4) with eight washers (5) and screws (6). (2)  Tighten eight screws (6) to 33-47 lb-ft (45-65 N·m). (3)  Install two alternator drive belts (7) on engine. CAUTION Steps   (4)   and   (5)   must   be   accomplished while  maintaining  belt  tension. Failure  to comply may result in damage to equipment. NOTE Tension adjustment  for new belt is  115-125 lbs (52-57 N).   For reinstalled belt 85-95 lbs (39-43 N). (4)  Adjust belt tension with idler pulley (8). (5)  Tighten two screws (9) to 43-51 lb-ft (58-69 N·m). c.   Follow-On Maintenance. (1)  Install engine fan and fan clutch (TM 9-2320-365-20-3). (2)  Start engine check for proper operation (TM 9-2320-365- 10). (3)  Shut down engine (TM 9-2320-365-10). End of Task. 3-76







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.