• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
M1079 DOOR GASKETS
APPENDIX EE TORQUE LIMITSLIMITS

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  1140    1141    1142    1143    1144  1145  1146    1147    1148    1149    1150  
TM 9-2320-365-34-2 D-50.   M1079 WINDOW SASH GLAZING SEALS Fabricate the M1079 window sash glazing seals according to the following steps.   Refer to the following parts list for materials. Description Material Part Number CAGE Code Cut Length Window Sash Top/Bottom Seal 941P00001 0SHR6 26-13/16 in. (681 mm) Window Sash Side Seal (van body serial numbers 001 through 190) 941P00001 0SHR6 28-1/2 in. (724 mm) Window Sash Side Seal (van body serial number 191 and higher) 941P00001 0SHR6 12-11/16 in. (322 mm) a.  Dimensions are in inches (millimeters). b.  Cut seal material to the specified length using a fine-toothed hacksaw or other suitable cutting tool. NOTE Cut  miters  so  that  short  side  of  seal  faces toward glass. c.  Cut 45-degree miters on ends of window sash seals. D-51.   BLOCK SEAL 12420489 FABRICATION Make block seal from P/N (0VXY8) STN2.38X.5. Use a suitable cutting tool to cut seal to 0.52 inch (1.3 cm) long. Change 1 D-71/(D-72 Blank)







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.