TM 9-2320-365-34-2
NOTE
Two thick washers must be installed in
slotted holes.
(6) Position two washers (11) and bolts (12) on inlet
manifold cover (3).
(7) Tighten two bolts (12) to 15-25 lb-ft (20-34 N·m).
(8) Connect heater tube (13) to fitting (14).
c. Follow-On Maintenance.
(1) Install turbocharger to charge air cooler tubes and hoses
(TM 9-2320-365-20-3).
(2) Add coolant to radiator overflow tank (TM 9-2320-365-10).
(3) Lower cab (TM 9-2320-365-10).
(4) Start engine (TM 9-2320-365-10).
(5) Check for coolant leaks under vehicle.
(6) Shut down engine (TM 9-2320-365-10).
(7) Add coolant to radiator overflow tank (TM 9-2320-365-
10).
End of Task.
3-125
