TM 9-2320-365-34-2
6-4. FUEL SHUTOFF SOLENOID REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Batteries disconnected (TM 9-2320-365-20-3).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Gen Mech (Item 68, Appendix B)
Tool Kit, Intl. Comb. Eng. (TM 9-2320-365-20)
Pan, Drain (Item 36, Appendix B)
Wrench, Torque, 0-75 lb-in. (Item 98, Appendix B)
Materials/Parts
Lockwasher (2) (Item 100, Appendix F)
Seal, Connector Tube (Item 256, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
Antifreeze (Item 12, Appendix C)
WARNING
Ensure engine is cool before performing
maintenance.
Failure to comply may
result in injury to personnel.
a. Removal.
(1) Open radiator drain cock (1) and drain [approximately 15
to 20 qt (14 to 19 L)].
(2) Disconnect compressor inlet coolant tube (2) from
thermostat housing (3).
6-28
Change 1