TM 9-2320-365-34-2
(40) Remove brush plate (55) from field ring (22).
NOTE
Note orientation of spring washers prior to
removal.
(41) Remove nut (61), two spring washers (62), washer (63),
and insulation (64) from field coil screw (15). Discard
spring washers.
(42) Remove plug (65) and oil wick (66) from commutator end
housing (46). Discard oil wick.
NOTE
Oil wick should soak in lubricating oil for a
minimum of four hours.
(43) Place replacement oil wick (66) in container of oil.
Change 1
6-36.3
