TM 9-2320-365-34-2
NOTE
Stator rollers and flat springs are installed
together. One roller and one spring per cam
pocket.
(5) Install 13 stator rollers (3) and flat springs (4) in
stator/cam (5).
CAUTION
Stator race must be installed with bevel side
down.
Failure to comply may result in
damage to equipment.
(6) Install stator race (6) in stator/cam (5).
(7) Install stator thrust plate (7) in stator/cam (5).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(8) Install retaining ring (8) in stator/cam (5).
7-11