TM 9-2320-365-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
b.
Installation.
WARNING
Transmission assembly weighs
approximately 1300 lbs (590 kgs).
Attach a suitable lifting device prior to
installation. Failure to comply may
result in injury to personnel or damage
to equipment.
(1) Place transmission (1) on transmission/differential lift.
(2) Remove bolt (2) from rear of transmission (1).
(3) Position bolt circle adapter (3) on rear of transmission
(1) with bolt (4).
(4) Remove bolt (5) from front of transmission (1).
(5) Position bolt circle adapter (3) on front of transmission
(1) with bolt (6).
(6) Tighten bolts (6, 7, and 8).
(7) Tighten bolts (4, 7, and 8) on rear of transmission (1).
7-28.14
Change 1
