TM 9-2320-365-34-2
7-7. STATIONARY CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR (CONT)
(3) Install valve (8), spring (9), stop (10), and retaining pin
(11) in clutch valve body (7).
(4) Install three filter screens (12) in clutch valve body (7).
(5) Install two face seals (13) in clutch valve body (7).
e. Installation.
(1) Position clutch valve body (1) on main valve body (2)
with eight screws (3).
(2) Tighten eight screws (3) to 108-120 lb-in. (12-14 N·m).
f. Follow-On Maintenance.
Install transmission internal wiring harness (para 7-13).
End of Task.
7-56
