TM 9-2320-365-34-2
9-6. STEERING KNUCKLE MECHANISM REPLACEMENT (CONT)
(40) Position drag link (27) on pivoting arm (4) with nut (29).
(41) Tighten nut (29) to 138-178 lb-ft (187-241 N·m).
(42) Install cotter pin (30) in nut (29).
(43) Position tie-rod (31) on steering knuckle (3) with nut (32).
(44) Tighten nut (32) to 140-180 lb-ft (190-244 N·m).
(45) Install cotter pin (33) in nut (32).
c. Follow-On Maintenance.
(1) Install front axle shaft (para 9-3).
(2) Operate vehicle and check steering knuckle for proper
operation (TM 9-2320-365-10).
End of Task.
9-30