TM 9-2320-365-34-2
(16) Remove adhesive, nut (16), terminal lugs TL25 (17),
TL46 (18), ground strap (19), and terminal lug TL53 (20)
from starting motor (21).
(17) Position nut (16) on starting motor (21).
NOTE
Perform step (18) on vehicles that have not
had connector P81 removed.
(18) Disconnect connector P81 (22) from starting motor (21).
(19) Loosen two clamps (23) on engine oil fill hose (24).
(20) Remove engine oil fill hose (24) from two oil fill tubes
(25).
(21) Loosen nut (26) on throttle control cable (27).
(22) Remove clip (28) from governor linkage (29).
(23) Remove throttle control cable (27) from bracket (30).
Change 1
3-17
