TM 9-2320-365-34-2
13-5. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT
(CONT)
(2) Remove pin (4) and shackle (5) from rear tension beam
(3).
(3) Remove three collars (6) and bolts (7) from rear tension
beam (3). Discard collars and bolts.
NOTE
Perform step (4) on model M1078/M1079.
(4) Remove two collars (8), bolts (9), and taillight mounting
bracket (10) from rear tension beam (3). Discard collars
and bolts.
NOTE
Perform step (5) on model M1081.
(5) Remove two self-locking nuts (11), bolts (12), taillight
mounting bracket (10), and load spreader bracket (13)
from rear tension beam (3). Discard self-locking nuts
and bolts.
(6) Perform steps (1) through (5) on right side of rear
tension beam (3).
(7) Remove rear tension beam (3) from vehicle.
13-10
Change 1