TM 9-2320-365-34-2
(3) Remove two collars (4), bolts (5), and rear bumper (3)
from vehicle. Discard collars and bolts.
b. Installation.
NOTE
Steps (1) through (4) require the aid of an
assistant.
Left and right side or rear bumper is installed
the same way. Left side shown.
(1) Position rear bumper (1) on vehicle with two bolts (2)
and self-locking nuts (3).
(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
(3) Position five bolts (4) and self-locking nuts (5) in rear
bumper (1).
(4) Tighten five self-locking nuts (5) to 210-225 lb-ft (285-
305 N·m).
(5) Perform steps (3) and (4) on right side of rear bumper.
c. Follow-On Maintenance.
Install rear fenders (TM 9-2320-365-20-4).
End of Task.
13-27