13-11. M1081 FRAME PLATE REPLACEMENT (CONT)
Steps (2) through (5) require the aid of an
(2) Remove self-locking nut (5) and ring (6) from rear
channel (7). Discard self-locking nut.
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(3) Remove four collars (8) and bolts (9) from rear channel
(7). Discard collars and bolts.
Cap or plug pneumatic hoses and connection
points to prevent contamination of pneumatic
Failure to comply may result in
damage to equipment.
(4) Remove 90-degree fitting (10) from frame plate (4).
Frame plate weighs approximately 50 lbs (23
kgs). Attach a suitable lifting device prior to
removal. Failure to comply may result in
damage to equipment or injury to personnel.
(5) Remove 13 collars (11), bolts (12), and frame plate (4)
from vehicle. Discard collars and bolts.