TM 9-2320-365-34-2
13-15. M1081 SUBFRAME RAIL REPLACEMENT (CONT)
b. Installation.
NOTE
Left and right side subframe rails are installed
the same way. Right side shown.
Install subframe rails from rear of vehicle.
Step (1) requires the aid of two assistants.
(1) Position subframe rail (1) on vehicle.
CAUTION
Ensure subframe rail flange is in contact with
main frame rail flange. Failure to comply
may result in damage to equipment.
NOTE
Steps (2) through (9) require the aid of an
assistant.
(2) Position three bolts (2) in bracket (3) with three self-
locking nuts (4).
(3) Tighten three self-locking nuts (4) to 210-225 lb-ft (285-
305 N·m).
(4) Position two bolts (5) in bracket (6) with two self-locking
nuts (7).
(5) Tighten two self-locking nuts (7) to 210-225 lb-ft (285-
305 N·m).
(6) Position two bolts (8) in rear support brace (9) with two
self-locking nuts (10).
(7) Tighten two self-locking nuts (10) to 210-225 lb-ft (285-
305 N·m).
13-78
Change 1