TM 9-2320-365-34-2
15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT)
(55) Route start and charging cable assembly (80), engine
control cable assembly (81) and grommet (82) inside cab
(24).
(56) Route vacuum hose (83) inside cab (24).
(57) Connect connector P119 (84) to connector J119 (85).
(58) Disconnect two heater hoses (86).
(59) Position two clamps (87) and heater hoses (86) on tubes
(88).
(60) Tighten two clamps (87) to 60-72 lb-in. (7-8 N·m).
(61) Position front grille (89) on cab (24) with washer (90)
and screw (91).
(62) Position two washers (92) and screws (93) in front grille
(89).
(63) Tighten screw (91) to 48-60 lb-in. (5-7 N·m).
(64) Tighten two screws (93) to 24 lb-in. (3 N·m).
15-82
