TM 9-2320-365-34-2
15-6. M1081 CAB WINDSHIELD FRAME REPLACEMENT/REPAIR (CONT)
(7) Position sunvisor (11) on windshield frame (2) with four
screws (12).
(8) Tighten four screws (12) to 22-27 lb-in. (2-3 N·m).
(9) Install seal (13) on windshield frame (2).
CAUTION
Use care when installing captive screws.
Failure to comply may result in damage to
equipment.
NOTE
• Lubricate captive screws prior to installation.
• All captive screws are installed the same way.
One shown.
• Tighten nut until captive screw is seated.
(10) Install captive screw (14) in windshield frame (2) with
washer and nut.
(11) Remove nut and washer from captive screw (14).
(12) Perform steps (10) and (11) on remaining nine captive
screws.
(13) Position five centering cups (15) on windshield frame (2)
with five screws (16).
(14) Tighten five screws (16) to 62-124 lb-in. (7-14 N·m).
15-112
