TM 9-2320-365-34-2
15-8. CARGO BED REPLACEMENT (CONT)
(14) Position mudflap (20) on bumper (21) with three screws
(22), spacers (23), washers (24), and nuts (25).
(15) Tighten three nuts (25) to 18-22 lb-ft (24-30 N·m).
(16) Perform steps (12) through (15) on left side fender and
mudflap.
e. Hinge Removal.
NOTE
Left, right, and rear hinges are removed the
same way. Left side shown.
(1) Remove two rivets (1) from hinge (2).
(2) Remove hinge (2) from cargo bed (3).
f. Hinge Installation.
(1) Position hinge (1) in vise.
(2) Enlarge two holes (2) on hinge (1) to 0.327-0.340 in.
(8.318-8.636 mm).
15-128
Change 1