18-2. M1078/M1079 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
Left and right side L-brackets are removed
and installed the same way.
(47) Remove self-locking nut (58), screw (59), and clamp (60)
from L-bracket (20).
The L-bracket will be mounted with elongated
hole against the rear crossmember and long
end of L-bracket pointing down.
(48) Install clamp (60) in small hole on L-bracket (20) with
screw (59) and self-locking nut (58).
Position L-bracket on rear crossmember with
long side of bracket facing down.
(49) Install L-bracket (20) on rear crossmember (9) with
screw (18) and self-locking nut (19).
(50) Perform steps (47) through (49) on left side L-bracket.