TM 9-2320-365-34-2
(67) Re-position lifting device on machine gun ring (59).
(68) Remove three wooden blocks from cab roof (51).
(69) Position machine gun ring (59) on cab roof (51).
(70) Position 12 washers (60) and screws (61) in machine
gun ring (59).
(71) Tighten 12 screws (61) 23 sequence to 49-61 lb-ft (66-
82 N·m).
b. Removal.
(1) Remove 12 screws (1) and washers (2) from machine
gun ring (3).
(2) Position three wooden blocks on cab roof (4).
WARNING
Machine gun ring assembly weighs
approximately 350 lbs (159 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Steps (3) through (7) require the aid of an
assistant.
(3) Position machine gun ring (3) on three wooden blocks.
(4) Re-position lifting device on machine gun ring (3).
Change 1
19-13
