• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Cleaning/Inspection - TM-9-2320-365-34-2_981
Table 20-8 Camshaft Minimum Lobe Lift

/.5tonv1-2/TM-9-2320-365-34-2 M10787 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicle (LMTV) Manual
Page Navigation
  908    909    910    911    912  913  914    915    916    917    918  
TM 9-2320-365-34-2 NOTE Replace any part that fails visual inspection or size measurement requirements. (3)  Measure   thickness    of   thrust   plate    (2). Minimum thickness is 0.182 in. (4.62 mm). NOTE If camshaft fails inspection, camshaft bearings and cam roller followers must also be replaced. (4)  Inspect  camshaft  lobes  (3)  and  journals  (4)  for  pitting, cracks, corrosion, and evidence of overheating. (5)  Inspect  camshaft  gear  (5)  for  cracks  and  damaged  or broken teeth. (6)  Measure  distance  between  camshaft  shoulder  (6)  and camshaft gear (7).   Minimum distance is 0.188 in. (4.78 mm). 20-53







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.