TM 9-2320-365-10
Section III. OPERATION UNDER USUAL CONDITIONS
2-19. M1079 VAN PREPARATION FOR MOVEMENT
WARNING
• Heavy objects/loads, such as tool boxes and heavy parts, must always be carried
on the floor with the weight distributed as equally as possible between left and ride
sides of M1079 van. Failure to comply decreases the stability of the M1079 van
and will increase the likelihood of a rollover.
• Heavy cabinets must always be mounted as low as possible with the weight
distributed as equally as possible between left and right sides of M1079 van.
Remember to consider the weight of the items that will be stored in the cabinets.
Failure to comply decreases the stability of the M1079 van and will increase the
likelihood of a rollover.
• Always keep in mind, when placing items inside the M1079 van, that heavier items
must always be positioned as low as possible and the weight distributed as equally
as possible between left and right sides of M1079 van. Failure to comply decreases
the stability of the M1079 van and will increase the likelihood of a rollover.
(1) All objects that can shift during movement will be secured by using a bracing,
cushioning, or tie-down method. The method used will be performed in a manner that
will not cause damage to the walls or equipment.
(2) Verify that all workbenches, lockers, cabinets, and shelves are securely attached to
walls and floor.
(3) Close van windows (para 2-33b).
(4) Disconnect van 12/24 vdc power (para 2-38b).
(5) Disconnect van AC power (para 2-32b).
(6) Close van doors (para 2-31b or d).
(7) Stow van ladder (para 2-30b).
2-126
