TM 9-2320-365-10
b. Preparation of Disabled Vehicle (M1078 Series).
CAUTION
• Both drive shafts must be removed if disabled M1078 series vehicle is flat
towed. Failure to comply may result in damage to towed vehicle.
• Front drive shaft must be removed prior to performing a rear connection lift and
tow. Failure to comply may result in damage to equipment.
• Rear drive shaft must be removed prior to performing a front connection lift and
tow. Failure to comply may result in damage to equipment.
NOTE
Disabled vehicles must be prepared and moved in accordance with FM 20-
22 and FM 21-305.
(1) Notify Unit Maintenance to remove drive shaft(s) as required.
(1.1) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2).
(2) Push in SYSTEM PARK control (3).
(3) Position hazard lights switch (4) to on.
Change 1
2-320.1/(2-320.2 Blank)
