TM 9-2320-365-10
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
e32.
TRANSMISSION TEMPERATURE INDICATOR DOES NOT ILLUMINATE (CONT).
(f)
Shut down engine (para 2-21f).
(g)
Install PDP cover (para 3-13b).
(h)
If transmission temperature indicator still does not illuminate, notify Unit Maintenance.
e33.
FRONT BRAKE AIR INDICATOR DOES NOT ILLUMINATE WHEN AIR PRESSURE IS
BELOW 65 PSI.
Step 1. Check to see if other indicator lights illuminate.
(a)
Position master power switch to on (para 2-21a or b).
If other indicator lights illuminate then go to step 2 of this fault.
If other indicator lights do not illuminate, notify Unit Maintenance.
(b)
Position master power switch to off (para 2-21f).
Step 2. Check operation of FRONT AIR BRAKE pressure gage.
(a)
Start engine (para 2-21a or b) and allow vehicle to build air pressure.
If FRONT BRAKE AIR pressure gage operates, notify Unit Maintenance.
If FRONT BRAKE AIR pressure gage does not operate, perform Electrical System
Troubleshooting (e9. Front Brake Air Pressure Gage Does Not Operate Or Is Inaccurate).
(b)
Shut down engine (para 2-21f).
e34.
REAR BRAKE AIR INDICATOR DOES NOT ILLUMINATE WHEN AIR PRESSURE IS
BELOW 65 PSI.
Step 1. Check to see if other indicator lights illuminate.
(a)
Position master power switch to on (para 2-21a or b).
If other indicator lights illuminate then go to step 2 of this fault.
If other indicator lights do not illuminate, notify Unit Maintenance.
(b)
Position master power switch to off (para 2-21f).
Step 2. Check operation of REAR AIR BRAKE pressure gage.
(a)
Position master power switch to on (para 2-21a or b).
(b)
Start engine (para 2-21a or b) and allow vehicle to build air pressure.
If REAR BRAKE AIR pressure gage operates, notify Unit Maintenance.
If REAR BRAKE AIR pressure gage does not operate, perform Electrical System
Troubleshooting (e8. Rear Brake Air Pressure Gage Does Not Operate Or Is Inaccurate).
(c)
Shut down engine (para 2-21f).
Change 1
3-43