TM 9-2320-365-10
3-5. CHANGING TIRE (CONT)
(3) Align ten holes (5) in wheel (6) with
studs (7).
CAUTION
Do not drag tire across studs or
crossthread lugnuts. Failure to
comply may result in damage to
equipment.
(4) Install wheel (6) on studs (7).
WARNING
Notify Unit Maintenance
that
lugnuts
must
be
tightened to 425-475 lb-ft
(576-644 N m) as soon as
possible. Tire may come
loose if lugnuts are not
tightened to proper torque.
Failure to comply may
result in serious injury or
death to personnel.
NOTE
• Studs and lugnuts on left side of
vehicle have left-hand threads.
Turn lugnuts to right to loosen,
and to left to tighten.
• Studs and lugnuts on right side of
vehicle have right-hand threads.
Turn lugnuts to left to loosen, and
to right to tighten.
(5) Install ten lugnuts (8) on studs (7)
in sequence shown.
3-80
Change 1
