TM 9-2320-365-10
NOTE
Perform steps (26) through
(49) on cab roofs equipped
with machine gun ring.
(26) Position LMHC hook (27) over center of
cab roof (19).
(27) Install y-adapter (28) on machine gun
ring (29).
CAUTION
Hook must be installed on
hole closest to the front of
cab roof.
Rotate machine
gun ring until hole is facing
towards front of vehicle.
Failure to comply may result
in damage to equipment.
(28) Install LMHC hook (27) to y-adapter (28).
WARNING
Cab roof and machine gun
ring weigh approximately
500 lbs (227 kgs). The aid
of
two
assistants
is
required to remove the cab
roof and machine gun ring.
Failure to comply may
result in injury to personnel
or damage to equipment.
NOTE
It may be necessary to push
up on cab roof, from inside
cab, to help loosen cab roof
from cab.
(29)
Lift cab roof (19) from cab (30) until
cab roof is clear of windshield (14),
right side panel (12), left side panel
(8), and rear panel (10).
Change 1
3-115
