TM 9-2320-365-34-1
D-36. WOODEN SKID FABRICATION 12420036
Cut, shape and drill the wooden skid from bulk wood stock according to the following information.
Figure D-50.
Wooden Skid illustrates the dimensions and hole locations.
Figure D-50. Wooden Skid
a. All dimensions are in inches (millimeters).
b. Fabricate (1) from MIL-STD 736 Group IV untreated bulk wood stock as illustrated in Figure D-50. Wooden Skid.
c. Drill 0.625 in. (15.8 mm) diameter hole 2 places as shown in Figure D-50. Wooden Skid.
d. Sand and remove sharp edges.
e. Mark 19207-12420036 with characters 0.25 in. (6.5 mm) high using ink TT-I-1795 where shown in Figure D-50
Wooden Skid and clear coat with lacquer per TT-L-50.
D-61
