c9. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN       CODE 32 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH       TRANSMISSION ADAPTER CABLE ASSEMBLY) WARNING       CAUTION       Read WARNING and CAUTION on following page. START             KNOWN INFO              Continuity Test or STE/ICE-R Test #91            TEST OPTIONS                REASON FOR QUESTION     YES Replace transmission external wiring harness (para 6-7). 1. TM 9-2320-365-34-1 2-156          Change 1 NO        POSSIBLE PROBLEMS        Is continuity present from connector P119-h to external wiring harness 31-pin connector pin W? If continuity is not present, transmission external wiring harness is faulty. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty C3 pressure switch. INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-365-10).     Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required     (2) References     TM 9-4910-571-12&P