RESISTANCE TEST - TM-9-2320-365-34-1

WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 41, 42, 44, 45, AND/OR 69 SUB CODE 12 (SERIAL NUMBER 6510032369 AND HIGHER) (CONT) - TM-9-2320-365-34-1_266

WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 41, 42, 44, 45, AND/OR 69 SUB CODE 12 (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)

/.5tonv1-2/TM-9-2320-365-34-1 M1078 Series 2-1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
227

Change 1 2-185 TM 9-2320-365-34-1 RESISTANCE TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to A solenoid connector pin A. (3) Connect negative (-) probe of multimeter to A solenoid connector pin B and note reading on multimeter. (4) If resistance is less than 2.5 ohms or more than 5.0 ohms, replace A solenoid (para 7-8). (5) If resistance is between 2.5-5.0 ohms, replace WTEC II TEPSS (TM 9-2320-365- 20-3). (6) Connect internal wiring harness connector A to A solenoid connector. (7) Install cover on control valve module with four screws. (8) Install control valve module (para 7-10). (9) Connect batteries (TM 9-2320-365-20-3).

Privacy Statement
Press Release
Contact