START 1. WARNING       CAUTION       Read WARNING and CAUTION on following page.             KNOWN INFO                         TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     Replace transmission external wiring harness (para 6-7). YES TM 9-2320-365-34-1 2-208          Change 1 NO        POSSIBLE PROBLEMS        Is continuity present from connector P119-T to external wiring harness 31-pin connector pin J? If continuity is not present, transmission external wiring harness is faulty. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty B solenoid. Faulty WTEC II TEPSS. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. INITIAL SETUP   Equipment Condition       Engine shut down (TM 9-2320-365-10).       Batteries disconnected (TM 9-2320-365-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 68, Appendix B)     STE/ICE-R (Item 60, Appendix B)     Multimeter, Digital (Item 34, Appendix B)     Goggles, Industrial (Item 25, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B)     Wrench Set, Socket (Item 75, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required   (2) References   TM 9-4910-571-12&P c14. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN         CODE 41, 42, 44, AND/OR 45 SUB CODE 13 (SERIAL NUMBER 6510032369 AND         HIGHER)