TM 9-2320-365-34-1Change 1 2-325CONTINUITY TESTCAUTIONNOTEUse care when testing electrical connectors.Do not damage connector pins or socketswith multimeter probes. Failure to complymay result in damage to equipment.Inspect connector pins/sockets for damage,corrosion, and serviceability. Check thatconnector pins are not pushed back andare capable of making good contact.(10) If continuity is present, transmissionadapter cable assembly is shorted; replacetransmission adapter cable assembly(para 6-8).(1) Loosen screw in adapter cable 24-pinconnector.(2) Disconnect adapter cable 24-pin connectorfrom internal wiring harness 24-pinconnector.(3) Set multimeter to ohms.(4) Connect positive (+) probe of multimeterto adapter cable 31-pin connector pin K.(5) Connect negative (-) probe of multimeter toadapter cable 24-pin connector pin E1 andnote reading on multimeter.(6) If continuity is not present, replacetransmission adapter cable assembly(para 6-8).(7) Connect positive (+) probe of multimeterto adapter cable 31-pin connector pin K.(8) Connect negative (-) probe of multimeter toall other pins in external wiring harness31-pin connector and note reading onmultimeter.(9) Connect negative (-) probe of multimeter toground and note reading on multimeter.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
