TM 9-2320-365-34-1Change 1 2-471CAUTIONUse care when testing electrical connectors.Do not damage connector pins or socketswith multimeter probes. Failure to complymay result in damage to equipment.NOTEInspect connector pins/sockets for damage,corrosion, and serviceability. Check thatconnector pins are not pushed back andare capable of making good contact.CONTINUITY TEST(1) Set multimeter to ohms.(2) Connect positive (+) probe of multimeterto adapter cable 31-pin connector pin F.(3) Connect negative (-) probe of multimeter toadapter cable 24-pin connector pin H2 andnote reading on multimeter.(4) If continuity is not present, replacetransmission adapter cable assembly(para 6-8).(5) Connect positive (+) probe of multimeterto adapter cable 31-pin connector pin F.(6) Connect negative (-) probe of multimeter toall other pins in adapter cable 31-pinconnector and note reading on multimeter.(7) Connect negative (-) probe of multimeter toground and note reading on multimeter.(8) If continuity is present, transmissionadapter cable assembly is shorted; replacetransmission adapter cable assembly(para 6-8).(9) Connect adapter cable 31-pin connectorto external wiring harness 31-pin connector.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
