Change 1 2-719TM 9-2320-365-34-1(1) Set multimeter to ohms.(2) Connect positive (+) probe of multimeterto pin A of C solenoid connector.(3) Connect negative (-) probe of multimeterto pin B of C solenoid connector and notereading on multimeter.(4) If resistance is less than 2.5 ohms orgreater than 5.0 ohms, replace C solenoid(para 7-7).(5) If resistance is between 2.5-5.0 ohms,replace WTEC III transmission ECU(TM 9-2320-365-20-3).(6) Connect internal wiring harnessconnector C to C solenoid connector.(7) Install cover on control valve module withfour screws.(8) Install control valve module (para 7-10).(9) Connect batteries (TM 9-2320-365-20-3).RESISTANCE TEST
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business