TM 9-2320-365-34-221-3. FRONT SUPPORT/CHARGING PUMP MODULE REPAIR (CONT)c. Assembly.NOTEPerform steps (1) and (2) if replacing pumphousing not equipped with a main relief valveand cycloidal gear to pump housing equippedwith main relief valve and cycloidal gear.(1) Replace drive hub PN 29503970 and gear PN 29511395with drive hub PN 29514799 and gear PN 29511395(para 21-5).(2) Replace converter pump PN 29503570 or 29511380 withconverter pump PN 29514788 (para 7-2).(3) Install two dowel pins (1) in front support (2).(4) Install spacer (3) on front support (2).CAUTIONEnsure flat surface on ground sleeve isaligned with index arrow on front support.Failure to comply may result in damage toequipment.(5) Install ground sleeve (4) in front support (2).(6) Install roller bearing (5) on front support (2) flush towithin 0.009 in. (0.022 cm) of top edge of front support(2).21-18
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business