TM 9-2320-365-34-2
(2) Remove self-locking nut (2) from pinion drive (3).
Discard self-locking nut.
(3) Remove input yoke (4) from pinion drive (3).
NOTE
Vehicles serial number 0001 through 3133
were not originally equipped with yoke seals.
Yoke
seals
may
not
be
present
if
maintenance has not been performed
previously on input yoke.
(4) Remove yoke seal (5) from input yoke (4). Discard yoke
seal.
(5) Remove seal (6) from bearing cage (7). Discard pinion
seal.
(6) Remove eight screws (8) and washers (9) from bearing
cage (6).
(7) Remove bearing cage (6) from differential carrier housing
(10).
(8) Remove pinion drive (3) from bearing cage (6).
NOTE
Number of shims may vary.
(9) Remove shims (11) from differential carrier housing (10).
(10) Measure and record thickness of shims (11).
Change 1
24-3
