TM 9-2320-365-34-2
Figure D-24. Spanner Wrench Jaw
a. Shape spanner jaw (2) as shown in Figure D-24. Spanner Wrench Jaw.
b. Drill 0.25 in. (6.35 mm) and 0.39 in. (10.0 mm) diameter holes through as shown in Figure D-29. Spanner
Wrench Jaw.
c. De-burr and remove sharp edges.
Figure D-25. Spanner Wrench Handle Piece
a. Shape spanner handle piece (1) the same as (2) except as shown in Figure D-25. Spanner Wrench Handle
Piece.
b. Drill 0.25 in. (6.35 mm) and 0.39 in. (10.0 mm) diameter holes through as shown in Figure D-25. Spanner
Wrench Handle Piece.
c. Cut slot in handle (4) as shown in Figure D-25
Spanner Wrench Handle Piece.
d. De-burr and remove sharp edges.
D-29
